PART |
Description |
Maker |
STI7102-BUD |
Cost-effective HD decoder for retail STBs
|
ST Microelectronics
|
AN3320 |
This application note is intended for system designers
|
STMicroelectronics
|
BPT1819E03 |
High Performance Silicon Bipolar Transistor Intended
|
BIPOLARICS
|
FF-1170-20 |
This filter is intended to provide very good insertion loss and transient potection.
|
JMK Inc.
|
ACTF480N ACTF480N_480.0_TO39-2 ACTF480N/480.0/TO39 |
LOW INSERTION LOSS Saw filter intended for use in satellite program receivers
|
Advanced Crystal Technology
|
TC1267 TC1267VET TC1267VETTR |
The TC1267 is an application-specific, low dropout regulator (LDO) specifically intended for use in PCI peripheral card applications complying with PCI Power Management (PCI 2.0). It provides an uninterrupted, 3.3V output voltage when the The TC1267 is an application-specific, low dropout regulator (LDO) specifically intended for use in PCI peripheral card applications ... 400mA PCI LDO
|
MICROCHIP[Microchip Technology]
|
M02013-XX |
CMOS Transimpedance Amplifier with AGC Intended for Fiber-optic Networks up to 3.2 Gbps
|
Mindspeed Technologies
|
2N1671 2N1671A 2N1671C 2N1671B |
intended for general purpose industrial applications where circuit economy is of primary importance
|
New Jersey Semi-Conductor Products, Inc.
|
DF2B6M4SL |
This product is designed for protection against electrostatic discharge and is not intended for any other purpose, including, but not limited to, voltage regulation.
|
Toshiba Semiconductor
|
ADA10001 |
The ADA10001 is a monolithic IC intended for use in applications requiring high linearity such as: Cellular Telephone Base Station ... From old datasheet system 8V Drop Amplifiers
|
Anadigics Inc
|